Cornerstone Articulating Corner Mount for Swivel Full Motion Wall Bracket for Large TVs VESA up to 800×400, 132 lb Capacity The Monoprice Cornerstone Articulating Corner wall mount is designed specifically for corner installations. The mount arms can independently articulate to allow centered or off-centered corner installation. The separate wall plates can be installed on separate adjacent walls. If the wall plates are attached to the same wall, the mount can be installed just like any other articulating TV wall mount. Features: Designed for televisions from 37″ ~ 63″ or higher, depending on VESA size and TV weight Supports displays weighing up to 132 lbs. (60kg) Supports TVs with VESA patterns from 100×100 to 800×400 Wall plates measure 8.9″ x 8″ Built-in bubble level Includes mounting hardware Dual arm and wall attachment design prevents sagging that may occur on traditional single arm corner mounts
Buy with Confidence: With Monoprice’s Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers.
Supports displays 37 inches to 63 inches, and up to 132 lbs
Size:VESA 400 (up to 16″ Studs) FITS 32-55″ TV’s up to VESA 400 and 110LBS This mount fits virtually all 32-55″ TVs sold today with VESA hole patterns from 50x50mm (2×2″) to 400x400mm (16×16″) and up to 110lbs.
14″4 EXTENSION, LOW 2.5″ PROFILE, 90° SWIVEL, Up 8° to Down 12° Tilt The articulating arm extends up to 14″4 from the wall yet collapses to 2.5″. The mount allows for up to 130° swivel and Up 8° to Down 12° Tilt
ALLOWS 3° ROTATION ADJUSTMENT TO LEVEL AFTER INSTALLATION. Slots in the TV plate allow for 3° of rotation adjustment to level the display after mounting.
MOUNTS TO TWO 16″ WOODEN STUDS AS WELL AS ALL MASONRY The CM4418 can be mounted to Two standard 16″ Wooden studs as well as all types of masonry. All mounting hardware is included.
7′ TWISTED VEINS HDMI CABLE AND 6″3 MAGNETIC BUBBLE LEVEL AND HDMI ADAPTER The mount includes a 5′ 9Twisted Veins High Speed with Ethernet HDMI cable featuring 4K 60HZ 3D signal support and a protective braided jacket. A 6″ 3-axis Magnetic Bubble Level ensures level mounting.,HDMI 90 Degree and 270 Degree Male to Female Adapter
INCLUDES ALL NECESSARY MOUNTING HARDWARE This mount ships with hardware for both wall and TV mounting.
Fits 32-55″ TVs with Hole Patterns up to VESA 400x400mm (16×16″) and up to 110lbs, Check your TV’s Wall Mounting Size before you purchase any TV wall mount, also known as VESA Size is the mounting hole pattern on your TV back
14″4 Extension yet only 2.5″ when Collapsed, 90° Swivel and Up 8° to Down 12° Tilt
Allows for 3° Rotation Adjustment to Level after Installation
Mounts to 16″ Wooden Studs as well as All Masonry
Includes a 5’9 Twisted Veins HDMI Cable, and a 6″ 3 Axis Magnetic Bubble Level,AND HDMI 90 Degree and 270 Degree Male to Female Adapter
The HD6VESA20 mounting pedestal can be used as a replacement, upgrade, or as an addition to an existing pedestal with a 4-Hole AMPS pattern. It is compatible with devices having a VESA 75 or VESA 100 mounting pattern. This mount includes Arkon’s 9” Heavy-Duty Aluminum 4-Hole Drill Base Mounting Pedestal with Multi-Angle Arm and VESA 75/VESA 100 Head (devices and holders sold separately). This sturdy 9”mount features three adjustment knobs at 2.5” intervals on the mount arm for easy positioning. Two additional 180° adjustment points at the top and bottom of the mount provide additional flexibility in positioning the device. Formerly an industry standard, the 4-Hole AMPS pattern consists of four holes located in a rectangular pattern spaced at 30.17mm by 38.05mm (measured as the center-to-center distance between holes). The 4-hole drill base mount is made of strong aluminum, and is ideal for environments where a more permanent solution is desirable, such as in a workshop or in retail. Screws are included. This mount can also be screwed directly into the floor or console of a car or truck. (Warning: Drilling into the vehicle’s floor may damage the vehicle. Use caution and consult a mobile install professional to avoid drilling into any sensitive vehicle components.) Adjust the multi-angle arm and rotate the swivel ball adapter head for 360° rotation for exact positioning of the device.
Compatible with devices and holders having a VESA 75 or VESA 100 pattern (not included)
4 hole drill base recommended for permanent installs
Multi angle arm has three adjustment knobs with two additional adjustment points