Cornerstone Articulating Corner Mount for Swivel Full Motion Wall Bracket for Large TVs VESA up to 800×400, 132 lb Capacity The Monoprice Cornerstone Articulating Corner wall mount is designed specifically for corner installations. The mount arms can independently articulate to allow centered or off-centered corner installation. The separate wall plates can be installed on separate adjacent walls. If the wall plates are attached to the same wall, the mount can be installed just like any other articulating TV wall mount. Features: Designed for televisions from 37″ ~ 63″ or higher, depending on VESA size and TV weight Supports displays weighing up to 132 lbs. (60kg) Supports TVs with VESA patterns from 100×100 to 800×400 Wall plates measure 8.9″ x 8″ Built-in bubble level Includes mounting hardware Dual arm and wall attachment design prevents sagging that may occur on traditional single arm corner mounts
Buy with Confidence: With Monoprice’s Lifetime Warranty on all Cables, you can rest assured we stand behind our products and our customers.
Supports displays 37 inches to 63 inches, and up to 132 lbs
Size:VESA 400 (up to 16″ Studs) FITS 32-55″ TV’s up to VESA 400 and 110LBS This mount fits virtually all 32-55″ TVs sold today with VESA hole patterns from 50x50mm (2×2″) to 400x400mm (16×16″) and up to 110lbs.
14″4 EXTENSION, LOW 2.5″ PROFILE, 90° SWIVEL, Up 8° to Down 12° Tilt The articulating arm extends up to 14″4 from the wall yet collapses to 2.5″. The mount allows for up to 130° swivel and Up 8° to Down 12° Tilt
ALLOWS 3° ROTATION ADJUSTMENT TO LEVEL AFTER INSTALLATION. Slots in the TV plate allow for 3° of rotation adjustment to level the display after mounting.
MOUNTS TO TWO 16″ WOODEN STUDS AS WELL AS ALL MASONRY The CM4418 can be mounted to Two standard 16″ Wooden studs as well as all types of masonry. All mounting hardware is included.
7′ TWISTED VEINS HDMI CABLE AND 6″3 MAGNETIC BUBBLE LEVEL AND HDMI ADAPTER The mount includes a 5′ 9Twisted Veins High Speed with Ethernet HDMI cable featuring 4K 60HZ 3D signal support and a protective braided jacket. A 6″ 3-axis Magnetic Bubble Level ensures level mounting.,HDMI 90 Degree and 270 Degree Male to Female Adapter
INCLUDES ALL NECESSARY MOUNTING HARDWARE This mount ships with hardware for both wall and TV mounting.
Fits 32-55″ TVs with Hole Patterns up to VESA 400x400mm (16×16″) and up to 110lbs, Check your TV’s Wall Mounting Size before you purchase any TV wall mount, also known as VESA Size is the mounting hole pattern on your TV back
14″4 Extension yet only 2.5″ when Collapsed, 90° Swivel and Up 8° to Down 12° Tilt
Allows for 3° Rotation Adjustment to Level after Installation
Mounts to 16″ Wooden Studs as well as All Masonry
Includes a 5’9 Twisted Veins HDMI Cable, and a 6″ 3 Axis Magnetic Bubble Level,AND HDMI 90 Degree and 270 Degree Male to Female Adapter
The Pipishell Articulating TV wall mount has been designed with strength and versatility in mind. The ultra slim design allows the TV to be folded flat against the wall when pushed back and then from a central position can be extended outwards maintaining its centralised position, tilted and turned in any direction you require.
Will the TV wall mount fit my TV?
First, please check your wall for wood studs, it cannot be used on concrete wall or drywall alone. Anchor needed is for concrete wall installation.
Next, the weight of your TV should be less than 145lbs (65kg).
Then, mounting holes distance on the back of TV must be less than 24″ (600mm) horizontally and 16″ (400mm) vertically.
Your TV should be at least 32 inch. Otherwise, you will see the bracket.
In addition, please check the area inside the 4 mounting holes to make sure there are not any plugs. Otherwise, the plate may block the plugs.
Finally, please check possible blocked cable/input.
Fits 37″ to 70″ flat panel TVs
Supports TV weight up to 145lbs / 65kg
Fits VESA mounting hole patterns: 200×100/200×200/300X200/300×300/400×200 400×300/400X400/500×300/600×200/600×400
Tilt adjusts 12 degrees forward or 3 degrees backward
Swivel up to 60 degrees
Extends up to 14.4″ and folds 3″ from the wall to save space
Wall mounting studs distance up to 16″
Rotate 3 degrees for perfect TV level adjustment
1x TV wall mount
1x Standard mounting hardware
1x 6ft high speed HDMI cable
1x 3-Axis magnetic bubble level
5x Cable ties
1x User manual
✅ ULTRA STRONG TV WALL BRACKET – Our TV wall mount is constructed from high quality steel materials and fits most 37-70″ TVs weighing up to 132lbs like Samsung, Sony, Panasonic, Thomson, Toshiba, Sharp, LG, Philips, JVC etc. Solid and sturdy TV bracket with compatible faceplate that fits VESA patterns from 200x100mm to 600x400mm. Please check the VESA pattern, weight, size of your TV before purchasing.
✅ ADJUSTABLE OPTIMAL VIEWING – This premium TV wall mount tilts +3°/-12°, swivels +/-60° (max swivel angle depends on TV size) and level adjusts +/-3° for maximum viewing flexibility. Easily customize your TV watching experience to find the most comfortable and healthiest viewing position.
✅SAVE MORE SPACE – Built with dual articulating arms that retract 3 inch from the wall in home position to save space and also extends up to a maximum 14.4 inch from the wall. Saving you some valuable space and adding a nice, neat appearance to your household.
✅30 MIN FAST AND EASY INSTALLATION – Comes with all the required mounting hardware needed, a detailed English graphical installation guide that is actually useful (and even funny) which helps you to install this full motion TV wall mount without any hassle.
✅AFTER-SALES SERVICE – Our TV wall mount brackets includes an incredible 5 years warranty and friendly customer service. If you have any issues whatever, pls feel free to email or call us anytime rain or shine.