Looking for a heavy duty, height adjustable, VESA compatible stand with interchangeable C-clamp and grommet bases? Then the MI-2752L is your answer. This VESA compatible desk mount tilts 90 degrees up and down in either direction, and swivels 180 degrees at two different joints. You can adjust the height of the pole a total of 17″ inches. Monitors can be rotated into portrait or landscape orientation and will hold in place.
17″ inches of height adjustment
Each monitor tilts 90 degrees up and 90 degrees down
Arms can swivel 180 degrees at two different joints
Monitors can be placed and held in either landscape or portrait orientation independent of one another
Cable management clips will help keep your cables organized
Heavy duty steel construction will stand the test of time
Arms support up to 22 pounds each
Black powder coat finish is highly scratch resistant
C-clamp and grommet bases allow for quick and convenient placement on all desktops – so easy even a caveman can do it!
It also includes all of the necessary hardware required for quick assembly and comes with an instructional manual
Comes with a 5-YEAR WARRANTY
Friendly, US-based customer service department is available to answer any questions you may have during normal business hours
Fits two displays 19 21.5 24 27 32 inches in size, with a maximum support weight of 22 pounds on each arm, using the 75x75mm or 100x100mm VESA square bolt holes pattern found on the back of the monitor. (measure distance, in millimeters, between bolt hole patterns if unsure of size)
Constructed of heavy duty steel, integrated cable management clips keep your cables organized, comes with interchangeable C-clamp or grommet bases, and mounting plates are detachable for easy monitor mounting.
Monitors can tilt up 90 degrees and down 90 degrees, swivel left and right 180 degrees at two different joints, and each screen can be rotated 360 degrees and held in portrait or landscape orientation independent of one another. Arm raises and lowers a total of 17 inches on the center pole.
Comes with all mounting hardware, tools, and instructions necessary for assembly. Mounting plates can be removed, attached to your monitors, then re-attached to the stand in a few minutes for easy installation.
Comes with a 5-year warranty and our US-based customer service team will be happy to help you with questions or issues during normal business hours.
Wanna stack one monitor over the other to enhance your work efficiency? Do not wanna drill hole on your desk?
HUANUO HNHM2 is a best chose for you!
MADE FOR STACKING CONFIGURATION Mount 2 monitors vertically one over the other on 1 stand, making it more convenient for working with 2 monitors at the same time
ERGONOMIC MONITOR RISER Raise monitors to ergonomic heights as your needs to make you free comfortable while working. The ergonomic design helps improve work posture to relieve strain on neck back and shoulder.
SUPER SPACE SAVER & DESKTOP ORGANIZER Hold 2 monitors on 1 single stand in vertical array, clearing up much valuable space on the desk and making your desktop spacious and tidy.
ADJUSTABLE FOR OPTIMAL VIEW After installed on the stand, your monitor can tilt from -15° to +15° and 360° rotate. Super easy to set your monitors at an optimal position as your need.
SOLID & STABLE The solid steel construction makes HNHM2 stable and secure. The movable heavy duty triangle base holds monitors stably without drilling hole; the steel grommet base also ensures the safety of monitors weighing up to 22lbs.
EASY INSTALLATION The removable VESA plates makes it easier to install. The whole setup can be finished in 10 mins. To fix the tilt angle, you just need to adjust the little screw on the top of the VESA connector.
INTEGRATED CABLE MANAGEMENT The clips on the stand keeps the messy cables clean and organized and wrenches stored for future adjustments.
ERGONOMIC MONITOR RISER – Keep your monitors at ergonomic heights, improving your work posture and reducing the strain on your neck, back and shoulder for more productive work
COMPATIBILITY – Widely compatible with most 13″ to 32″ LCD monitors with VESA pattern of 75x75mm and 100x100mm,weighing up to 22lbs
ADJUSTABLE FOR BETTER VIEW – Easy to set monitors to optimal view angle and position with the tilt, swivel and rotation function; The detachable vesa plates makes it easy for installation
STABILITY – The heavy duty base make it hold your monitors securely on the stand without drilling hold on the desk. The grommet base increase the stability. The grommet mounting fits desk thickness up to 2.36″
SAVE SPACE – Instead of standing with 2 large bases, this stand hold 2 monitors on 1 stand, saving more space on your desktop and keep your workstation spacious and clutter-free
NOTE: This monitor mount only fit monitors which own the following three specs at the same time: 1. Screen size: 13″ to 27″ 2. Weight capacity: 2.2 lbs to 17.6 lbs 3. Must have VESA mounting holes and the VESA pattern is 75×75 or 100x100mm.
Main Features Full Motion Triple Monitor Mount – The plate/monitor can be 180° swiveled and 180° rotated; – The joints in the middle part of the arm can be 360° swiveled; – The lowest joint near the pole can be 180° swiveled; – The plate/monitor can be tilted from -35° to +35°.
Counterbalance Height Adjustment The internal counterbalance gas spring adjusts to the weight of your monitor creating a suspended free-float effect that allows you to instantly adjust the height of your monitor without the use of tools. The weight adjustment bolt is located on the back of the mount and we include the hex tool to make this adjustment.
Integrated Cable Management The easily detachable integrated cable management system helps keep AV and power cords out of sight and organized. Allow wires to move freely while changing screen positions and keep cable neat organized with detachable cable clips on the arms.
Detachable VESA Plate Mounting your monitors is a simple process with a detachable VESA bracket plate. We provide a step-by-step manual and the necessary tools & hardware for assembly.
Two Installation Methods Option 1 (Clamp): desk/table thicknesses is 0.4 – 3.35 inch. Option 2 (Grommet): desk/table thicknesses is 4 inch or less.
Package Include: 1. MOUNTPRO Triple Monitor Gas Spring Mount x 1 2. Mounting Hardware Kit x 1 3. User Manual x 1
Full Motion Monitor Desk Mount – This gas spring triple monitor arm enables you to adjust monitor with 360° rotation, ±90° swivel and -35°/+35° tilt functions, easily finding optimal view angle. This gas spring triple monitor arm can hold your monitor at any height( between 4.5″ and 27.8″ from the table surface) by adjusting the monitor arm to proper tension.
Wide Compatible -This triple arm monitor stand widely fits most 13″ to 27″ LCD computer monitors with VESA 75mm x 75mm and 100mm x 100mm, weight from 2.2 lbs to 17.6 lbs.
Dual Install Options – Fits desks with or without a hole. C-Clamp is mounted on the desk from 0.4″ to 3.35″ in thickness and grommet base mounting works for desks with thickness up to 3.35″.
Clutter-free Desktop – Mounted on the edge of the desk without original large base, this gas spring monitor stand saves space on your workstation. The easily detachable integrated cable management system helps keep AV and power cords out of sight and organized.
Easy Assembly – Includes all the related accessories and installation manual, the setup of this monitor desk mount can be finished in 10 mins. MOUNTPRO monitor stands enjoy a lifetime technical support if you have any questions.