VESA Mount Adapter (2 Pack) for HP Pavilion 27xw, 25xw, 24xw, 23xw, 22xw, 22cwa, 27cw, 25cw, 24cw, 23cw, and 22cw Monitors [Patented] – by HumanCentric

MOUNT THE UNMOUNTABLE

Bought an HP Pavilion monitor and disappointed that you can’t VESA mount it? This bracket enables you to mount select HP Pavilion monitors to a desk mount, articulating arm, or any other VESA mounting system.

Fits ONLY the following HP Monitors:

  • Pavilion 22cw
  • Pavilion 22cwa
  • Pavilion 22xw
  • Pavilion 23cw
  • Pavilion 23xw
  • Pavilion 24cw
  • Pavilion 24xw
  • Pavilion 25cw
  • Pavilion 25xw
  • Pavilion 27cw
  • Pavilion 27xw

**DOES NOT FIT ANY OTHER BRANDS OR MODELS. Check to make sure your monitor is listed before ordering! **

Fits Standard VESA Hole Patterns: 75 mm x 75 mm, 100 mm x 100 mm

Included are nuts to secure the bracket to the VESA mount, and the only tool required for installation is a screwdriver that fits the screws that came with your VESA mount.

A VESA mount can be used to save desk space or provide additional viewing flexibility by mounting the monitor on a stand, movable arm, multiple-monitor mount, or a wall mount.

Product Features

  • FITS CERTAIN HP PAVILION MONITORS: This bracket is ONLY tested and guaranteed to work with: HP Pavilion 22cw, 22cwa, 22xw, 23cw, 23xw, 24cw, 24xw, 25cw, 25xw, 27cw, 27xw
  • MOUNT YOUR HP PAVILION MONITOR ON A STANDARD VESA MOUNT – Even though these monitors weren’t made with mounting holes, our convenient bracket enables you to connect your HP Pavilion monitor anyway! Whether you’re looking to mount it on the wall or just get it off your desk, this bracket will let you connect your monitor in seconds. Works with double and triple (and more) mounts too!
  • EASY INSTALLATION – You’ll be able to install this bracket in less than two minutes with nothing more than a screwdriver! Just remove the existing base and snap ours in place instead – then connect it right to the VESA mount. We’ve tested our mount extensively to make sure it fits your monitor just right.
  • SATISFACTION GUARANTEED – If you have any problems with your mount, send it right back to us – no questions asked. Our bracket is guaranteed to fit your monitor, or your money back.

Visit the website for more information…

HIDEit Uni-M | Patented Adjustable Set-top Box Mount, PlayStation Bracket, Cable Box Storage, Satellite Receiver, Security DVR, Component Shelving Solution Made in the USA

MEASURE YOUR DEVICE
Our Uni-M fits the following dimensions:
Vertical Height: 10″ to 13.95″
Vertical Length at least 7″
Vertical Depth: 1.5″ to 2.75″

If these measurement don’t work for your component we have other mounts for larger and smaller components

COMPATIBLE WITH:
Please verify dimensions of boxes to ensure compatibility. AT&T U-verse boxes, Select Cisco Scientific Atlanta systems, Sky TV, Motorola STBs, Comcast Xfinity Set top boxes, PS4 Slim, PS3 Super Slim, PS4, PS4 Pro, PS4 Slim,Charter Spectrum boxes, Verizon Fios Boxes, Directv Receivers, Dish DVRs, Swann NVR boxes, and many more systems!

FEATURES
Adjustable to fit wide range of devices.
Easy access to power button, output jacks, and cables on either side of device.
Cold-rolled 16-gauge steel for superior strength.
Made in the USA from Recycled & Imported Steel.
Powder coat finish prevents rust and won’t chip.
Quick and easy to install.
Includes drywall screws and anchors rated for 25lbs. Stud mounting is optional.

Product Features

  • CHECK YOUR DIMENSIONS. Adjustable to fit a wide variety of devices. Vertical Height: 10″ to 13.95″ – Vertical Length 8″ (Overhang is fine) Vertical Depth 1.5″ to 2.75″
  • HIDE YOUR CABLE BOX BEHIND THE TV. REMOTE WILL STILL WORK. Enjoy your beautifully wall mounted TV without looking at a mess of wires and boxes! IR remote signals can reach your cable box from behind the TV. Test by holding your device behind the TV. Many new devices use RF technology not requiring line of sight.
  • MADE IN THE USA FROM STEEL FOR ULTIMATE STRENGTH. Made from cold-rolled 16-gauge steel for strength you can trust without unnecessary bulk. Our black powder-coat finish won’t rust or chip. Allows convenient access to buttons, ports, and cords.
  • EASY INSTALLATION. Easy to understand instructions. No complicated templates. Drill not required. Stud mounting is optional. Brackets easily connect and are held together by the provided hardware. Flat countersink screws, drywall anchors rated for 25 pounds, and black thumb nuts included.
  • WHY HIDEit? Made in the USA. We are the experts in device wall mounts and pioneered the industry in 2009. HIDEit Mounts are made from high quality materials in a state-of-the-art manufacturing facility. Should you ever have an issue, all employees are located in Reno, Nevada and are available via phone, email, chat and social media. Web search #afterHIDEit to see more customer setups.

Click here if you need more detailed info…

VESA Mount Adapter for Dell S2218, SE2219, S2318, S2319, S2418, S2419, SE2419, S2718, S2719, SE2719 Monitors | Does Not Fit Ultrathin Monitors S2718D, S2719HM, and S2719DM [Patented] – by HumanCentric

VESA Mount Adapter for Dell S2218, SE2219, S2318, S2319, S2418, S2419, SE2419, S2718, S2719, SE2719 Monitors | Does Not Fit Ultrathin Monitors S2718D, S2719HM, and S2719DM [Patented] – by HumanCentric

Product Features

  • FITS SELECT DELL S-SERIES MONITORS: This bracket is tested and guaranteed to work with: Dell S2218H, SE2219H, S2318HX, S2318HN, S2318NX, S2319H, S2319HN, S2418HX, S2418HN, S2418NX, S2419H, S2419HN, SE2419H, S2718HX, S2718HN, S2718NX, S2719H, S2719HN, and SE2719H (Does not fit any Ultrathin monitors such as S2718D, S2419HM and S2719DM)
  • MOUNT YOUR DELL MONITOR ON A STANDARD VESA MOUNT – Even though these monitors weren’t made with mounting holes, our convenient bracket enables you to connect your Dell monitor anyway! Whether you’re looking to mount it on the wall or just get it off your desk, this bracket will let you connect your monitor in seconds. Works with double and triple (and more) mounts too!
  • EASY INSTALLATION – You’ll be able to install this bracket in less than two minutes with nothing more than a screwdriver! Just remove the existing base and snap ours in place instead – then connect it right to the VESA mount. We’ve tested our mount extensively to make sure it fits your monitor just right.
  • SATISFACTION GUARANTEED – If you have any problems with your mount, send it right back to us – no questions asked. Our bracket is guaranteed to fit your monitor, or your money back.

Click Here For More Information