1、Fits 37-70″ Tvs up to VESA 600x400mm and 132lbs this TV wall mount fits most 37-70″ Tvs sold today with VESA hole patterns 200x100mm, 200x200mm, 400x200mm, 400x400mm, 600x400mm
2、used on 16” – 24” wood studs the TV mount can be installed into solid concrete wall or wood studs. (Studs distance 16”/24”) Do not install into drywall alone!
3、allow +3º/-15º tilt the TV wall mount bracket offers +3º/-15º tilt to improve viewing and reduce glare. There are 2 handles on the brackets, you can adjust to your desired angle then fasten easily. 4、post installation leveling adjustment your TV wall mount is not level after installation, you can locate the lower end and lift the bottom of the TV slightly by hand, use a Allen key to turn the leveling bolts at the top of bracket counter clockwise. 5、lock strap design adjustable lock straps allow to remove your TV from the mount easily. 6、low profile 58mm(2.3″) from the wall the TV mount bracket enables you to easily access cables and display your TV with stylish appearance. we offer 10-year warranty for TV mount bracket. If you have any problems or concerns, please feel free to contact with us any time via [email protected]
✔️Post installation leveling – have to re-install your mount If the TV is unlevel? No, just turn a bolt to get it corrected! This TV mount supports up-down post installation leveling adjustment if your TV is not level after installation.
✔️Tilting and low profile – the tilting TV bracket offers +3°/-15° tilt to eliminate annoying screen glare. Low-profile design securely holds your TV only 58mm(2.3″) from the wall.
✔️Apply on – our TV wall mount can be used on Solid concrete wall and wood studs (studs distance 16″ – 24″). do not install into drywall alone! Concrete Anchors will be sent per request.
✔️Compatibility – the TV wall mounts fit 37-70″ Tvs up to 132lbs with VESA from 200x100mm/ 8×4″ To 600x400mm/ 24×16″ (Mounting hole pattern 200x100mm, 200x200mm, 400x200mm, 400x400mm, 600x400mm )
✔️We provide 10-Year warranty for TV mount bracket and offer friendly us based customer service.
TV wall mount fit most 37-70″ TVs up to 132 LBS, with VESA (mounting holes spacing) from 200x100mm to 600x400mm. The TV’s weight and mounting pattern are within the limit specified above. Please DON’T depend on the screen size only. Determine your TV’s weight and mounting pattern first.
Applied on：Concrete Wall/Dry wall with wood studs (stud distance 16″-24″)
Viewing angle: Tilt adjusts 8 degree forward, easy one-touch tilt to adjust angle easily with lock by strap, so it will be stable once angle fixed.
Hanging notes: To hang or take off TV, make sure the tilting angle is 0-degree. Please pre-tighten the inner side tilting bolts before hanging the TV on the wall plate.
1x TV wall mount 1x Installation instruction 1x Standard mounting hardware 1x Mounting template 1x high speed HDMI cable 1x 3-Axis magnetic bubble level 3x Cable ties
✅TV wall mounts for most 37-70″ TVs up to 132 LBS. VESA(mounting holes spacing): 200 x 100mm 200 x 200mm 300 x 200mm 200 x 300mm 300 x 300mm 400 x 200mm 400 x 300mm 400 x 400mm 500 x 300mm 600 x 400mm.
✅For 16″/18″/ 24″ wooden studs wall and and concrete/brick walls. Concrete anchors will be sent if requested by every customer. All our TV mounts are NOT for dry wall alone installation.
✅Place your TV close to wall. Flush-Tilt design is only 1.5″ from wall yet still tilts to improve viewing and reduce glare.
✅Easy installation with decent instruction, and all included hardware in pre-labeled bags. Pulling straps locks and releases TV breezily. Comes with 1 HDMI cable, Torpedo level and cable ties for cable management.
✅US based Mounting Dream customer support is ready to help your installation questions. Please reach out to us if you need any help at all. Our mount is 10-year warranty.
Looking for a 30″ to 60″ ceiling mount for your flat screen television? The MI-509B, is ideal for any room or office with limited wall space. This well-engineered, premium grade of steel mount will firmly mount to your ceiling holding your precious LCD, LED flat screen TV with the weight capacity of 110 pounds. This exceptional ceiling TV mount tilts up to 20 degrees, swivels 360 degrees and it extends from 22 to 35.8 inches from the ceiling to help you optimize your viewing angles from anywhere in the room. This ceiling mount fits most 32 to 60 inch plasmas, LCD, LED TVs with the VESA hole pattern of 800 x 450mm.
The MI-509, features an adjustable height drop of 22 inches to 31.5 inches, cable management with the tilting and swiveling option.
Specifications : Installation: Ceiling Adjustable height drop: 22 in. – 35.8 in. Cable management Premium Grade Steel Tilt: -25 degrees (down) Swivel: 360 degrees (left or right) Supports (in inches) 32, 35, 37, 38, 40, 42, 45, 48, 50, 55, 60 Load capacity: 110 lbs VESA: 200×200, 300×300, 400×200, 400×300, 400X400, 600×200, 600×300, 600×400 mm Built-in Bubble Level Includes complete hardware kit and installation instructions Color: Black
CEILING TV MOUNT: Premium ceiling bracket for flat or vaulted (slanted) ceilings. Save space and increase functionality of your television. Use in homes, theaters, businesses, schools, hospitals, lobbies, hotels, manufacturing plants, production lines
UNIVERSAL VESA BRACKET: Fits most TV brands with screen size of 32, 35, 37, 38, 40, 42, 45, 48, 50, 55, 60, 65, 70 and some 75. Compatible with standard VESA patterns of 200×200, 300×300, 400×200, 400×300, 400X400, 600×200, 600×300, 600×400
FULL MOTION DESIGN: Height adjustable (22 to 36 inches), tilt down up to 25 degrees, 360 degree full rotation/swivel. Up to 60 degrees of swivel at the base for angled/sloped ceilings.
HEAVY DUTY: Commercial grade with high-strength steel. Tested to 3 times the rated capacity of 110 Lbs.
EASY INSTALLATION: Simple connection to all types of ceilings. Cable management holes in the bracket plate ensure you have easy access to cords and ports.