TV Wall Mount Bracket with Full Motion Articulating Dual Arm Swivel Tilt fit 23 32 37 42 47 50 55 Inch Flat Screen TVs,VESA 400X400 and 110lbs,Fits up to 16″ Studs, Includes HDMI and HDMI Adapter

Size:VESA 400 (up to 16″ Studs)
FITS 32-55″ TV’s up to VESA 400 and 110LBS
This mount fits virtually all 32-55″ TVs sold today with VESA hole patterns from 50x50mm (2×2″) to 400x400mm (16×16″) and up to 110lbs.

14″4 EXTENSION, LOW 2.5″ PROFILE, 90° SWIVEL, Up 8° to Down 12°
Tilt The articulating arm extends up to 14″4 from the wall yet collapses to 2.5″. The mount allows for up to 130° swivel and Up 8° to Down 12° Tilt

ALLOWS 3° ROTATION ADJUSTMENT TO LEVEL AFTER INSTALLATION.
Slots in the TV plate allow for 3° of rotation adjustment to level the display after mounting.

MOUNTS TO TWO 16″ WOODEN STUDS AS WELL AS ALL MASONRY
The CM4418 can be mounted to Two standard 16″ Wooden studs as well as all types of masonry. All mounting hardware is included.

7′ TWISTED VEINS HDMI CABLE AND 6″3 MAGNETIC BUBBLE LEVEL AND HDMI ADAPTER
The mount includes a 5′ 9Twisted Veins High Speed with Ethernet HDMI cable featuring 4K 60HZ 3D signal support and a protective braided jacket. A 6″ 3-axis Magnetic Bubble Level ensures level mounting.,HDMI 90 Degree and 270 Degree Male to Female Adapter

INCLUDES ALL NECESSARY MOUNTING HARDWARE
This mount ships with hardware for both wall and TV mounting.

Product Features

  • Fits 32-55″ TVs with Hole Patterns up to VESA 400x400mm (16×16″) and up to 110lbs, Check your TV’s Wall Mounting Size before you purchase any TV wall mount, also known as VESA Size is the mounting hole pattern on your TV back
  • 14″4 Extension yet only 2.5″ when Collapsed, 90° Swivel and Up 8° to Down 12° Tilt
  • Allows for 3° Rotation Adjustment to Level after Installation
  • Mounts to 16″ Wooden Studs as well as All Masonry
  • Includes a 5’9 Twisted Veins HDMI Cable, and a 6″ 3 Axis Magnetic Bubble Level,AND HDMI 90 Degree and 270 Degree Male to Female Adapter

Check out our website for details…

3 thoughts on “TV Wall Mount Bracket with Full Motion Articulating Dual Arm Swivel Tilt fit 23 32 37 42 47 50 55 Inch Flat Screen TVs,VESA 400X400 and 110lbs,Fits up to 16″ Studs, Includes HDMI and HDMI Adapter

  1. 2 arms are better than 1 Single arm mounts are great for corners, but this is the way to go for a flat wall mount if you need some turn and tilt. I have fairly thick 43″ flat screen that’s over 40lbs. I wasn’t content hanging that off a single arm into one wall stud, so I opted for this design. I was able to screw into 2 studs on each end using the 4 heavy duty screws it comes with. The arms were a little stiff, so I recommend pulling them in and out several times before hanging the TV on it or use some WD-40…

  2. For what I paid I could ask for more…but would expect a higher price. It does the job.Pros:Plenty of holes you can use for mounting to your wall. Even if you mount straight to the stud, you’ll have a few left over if you wish to toss in some drywall anchored mounts just for measure.Feels/sounds solid enoughComes with just about all the tools/hardware you’ll need. (Drill, and appropriate drill bits sold separately.)Cons:I wish it would angle more.Additional outward extension would be appreciated, but not a…

  3. Solid We used this bracket for a 45″ Samsung TV. The product had limited instructions but installation was fairly straight forward. They provided ample accessories (bolts, washers, spacers, etc.) for a variety of application needs. The double brackets provides extra stability. The only initial concern was the extra rigidness of the various joints making it difficult to expand and contract. Slight loosening of pivot-point lock-nuts allowed smooth movement. I would suggest they discuss this with…

Leave a Reply

Your email address will not be published. Required fields are marked *